What is a Case Study?
A case study is a description of an actual administrative situation involving a decision to be made or a problem to be solved. It can be a real situation that actually happened just as described, or may included portions that have been disguised for reasons of privacy. Most case studies are written in such a way that the reader takes the place of the manager whose responsibility is to make decisions to help solve the problem. In almost all case studies, a decision must be made, although that decision might simply be to leave the situation as it is and do nothing.
The Case Method as a Learning Tool
The case method of analysis is a learning tool in which students and instructors participate in direct discussion of case studies, as opposed to the lecture method, where the instructor speaks and students listen and take notes. In the case method, students teach themselves, with the instructor being an active guide, rather than just a talking head delivering content. The focus is on students learning through their joint, co-operative effort. Assigned cases are first prepared by students, and this preparation forms the basis for class discussion under the direction of the instructor. Students learn, often unconsciously, how to evaluate a problem, how to make decisions, and how to orally argue a point of view. Using this method, they also learn how to think in terms of the problems faced by an administrator. In courses that use the case method extensively, a significant part of the student’s evaluation may rest with classroom participation in case discussions, with another substantial portion resting on written case analyses. For these reasons, using the case method tends to be very intensive for both students and instructor.
How to do a Case Study
While there is no one definitive “Case Method” or approach, there are common steps that most approaches recommend be followed in tackling a case study. It is inevitable that different instructors will tell you to do things differently, this is part of life and will also be part of working for others. This variety is beneficial since it will show you different ways of approaching decision making. What follows is intended to be a rather general approach, portions of which have been taken from an excellent book entitled, Learning with Cases, by Erskine, Leenders, & Mauffette-Leenders, published by the Richard Ivey School of Business, The University of Western Ontario, 1997.
| Tunghai University – College of Management
The Case Method 2 An Approach to Case Analysis
Beforehand (usually a week before), you will get: 1. the case study, 2. (often) some guiding questions that will need to be answered, and 3. (sometimes) some reading assignments that have some relevance to the case subject. Your work in completing the case can be divided up into three components: 1. what you do to prepare before the class discussion, 2. what takes place in the class discussion of the case, and 3. anything required after the class discussion has taken place. For maximum effectiveness, it is essential that you do all three components. Here are the subcomponents, in order. We will discuss them in more detail shortly. 1. Before the class discussion: 1. Read the reading assignments (if any) 2. Use the Short Cycle Process to familiarize yourself with the case. 3. Use the Long Cycle Process to analyze the case 4. Usually there will be group meetings to discuss your ideas. 5. Write up the case (if required) 2. In the class discussion: 1. Someone will start the discussion, usually at the prompting of the instructor. 2. Listen carefully and take notes. Pay close attention to assumptions. Insist that they are clearly stated. 3. Take part in the discussion. Your contribution is important, and is likely a part of your evaluation for the course. 3. After the class discussion: 1. Review ASAP after the class. Note what the key concept was and how the case fits into the course.
Preparing A Case Study: A Two Step Process
It helps to have a system when sitting down to prepare a case study as the amount of information and issues to be resolved can initially seem quite overwhelming. The following is a good way to start.
Step 1: The Short Cycle Process
1. Quickly read the case. If it is a long case, at this stage you may want to read only the first few and last paragraphs. You should then be able to | Tunghai University – College of Management
The Case Method 3 An Approach to Case Analysis
2. Answer the following questions: 1. Who is the decision maker in this case, and what is their position and responsibilities? 2. What appears to be the issue (of concern, problem, challenge, or opportunity) and its significance for the organization? 3. Why has the issue arisen and why is the decision maker involved now? 4. When does the decision maker have to decide, resolve, act or dispose of the issue? What is the urgency to the situation? 3. Take a look at the Exhibits to see what numbers have been provided. 4. Review the case subtitles to see what areas are covered in more depth. 5. Review the case questions if they have been provided.
This may give you some clues are what the main issues are to be resolved. You should now be familiar with what the case study is about, and are ready to begin the process of analyzing it. You are not done yet! Many students mistakenly believe that this is all the preparation needed for a class discussion of a case study. If this was the extent of your preparation, your ability to contribute to the discussion would likely be limited to the first one quarter of the class time allotted. You need to go further to prepare the case, using the next step. One of the primary reasons for doing the short cycle process is to give you an indication of how much work will need to be done to prepare the case study properly.
Step 2: The Long Cycle Process
At this point, the task consists of two parts: 1. A detailed reading of the case, and then 2. Analyzing the case. When you are doing the detailed reading of the case study, look for the following sections: 1. Opening paragraph: introduces the situation. 2. Background information: industry, organization, products, history, competition, financial information, and anything else of significance. 3. Specific (functional) area of interest: marketing, finance, operations, human resources, or integrated. 4. The specific problem or decision(s) to be made. 5. Alternatives open to the decision maker, which may or may not be stated in the case. 6. Conclusion: sets up the task, any constraints or limitations, and the urgency of the situation. Most, but not all case studies will follow this format. The purpose here is to thoroughly understand the situation and the decisions that will need to be made. Take your time, make notes, and keep focused on your objectives.
| Tunghai University – College of Management
The Case Method 4 An Approach to Case Analysis
Analyzing the case should take the following steps: 1. 2. 3. 4. 5. 6. 7. Defining the issue(s) Analyzing the case data Generating alternatives Selecting decision criteria Analyzing and evaluating alternatives Selecting the preferred alternative Developing an action/implementation plan
Defining the issue(s)/Problem Statement The problem statement should be a clear, concise statement of exactly what needs to be addressed. This is not easy to write! The work that you did in the short cycle process answered the basic questions. Now it is time to decide what the main issues to be addressed are going to be in much more detail. Asking yourself the following questions may help: 1. What appears to be the problem(s) here? 2. How do I know that this is a problem? Note that by asking this question, you will be helping to differentiate the symptoms of the problem from the problem itself. Example: while declining sales or unhappy employees are a problem to most companies, they are in fact, symptoms of underlying problems which need to addressed. 3. What are the immediate issues that need to be addressed? This helps to differentiate between issues that can be resolved within the context of the case, and those that are bigger issues that needed to addressed at a another time (preferably by someone else!).
4. Differentiate between importance and urgency for the issues identified. Some issues may appear to be urgent, but upon closer examination are relatively unimportant, while others may be far more important (relative to solving our problem) than urgent. You want to deal with important issues in order of urgency to keep focused on your objective. Important issues are those that have a significant effect on: 1. profitability, 2. strategic direction of the company, 3. source of competitive advantage, 4. morale of the company’s employees, and/or 5. customer satisfaction. The problem statement may be framed as a question, e.g.: What should Joe do? Or How can Mr. Smith improve market share? Usually the problem statement has to be re-written several times during the analysis of a case, as you peel back the layers of symptoms or causation. | Tunghai University – College of Management
The Case Method 5 An Approach to Case Analysis
Analyzing Case Data In analyzing the case data, you are trying to answer the following: 1. Why or how did these issues arise? You are trying to determine cause and effect for the problems identified. You cannot solve a problem that you cannot determine the cause of! It may be helpful to think of the organization in question as consisting of the following components: 1. Resources such as materials, equipment, or supplies, and 2. People who transform these resources using 3. Processes which create something of greater value. Now, where are the problems being caused within this framework, and why? 2. Who is affected most by this issues? You are trying to identify who are the relevant stakeholders to the situation, and who will be affected by the decisions to be made.
3. What are the constraints and opportunities implicit to this situation? It is very rare that resources are not a constraint, and allocations must be made on the assumption that not enough will be available to please everyone. 4. What do the numbers tell you? You need to take a look at the numbers given in the case study and make a judgment as to their relevance to the problem identified. Not all numbers will be immediately useful or relevant, but you need to be careful not to overlook anything. When deciding to analyze numbers, keep in mind why you are doing it, and what you intend to do with the result. Use common sense and comparisons to industry standards when making judgments as to the meaning of your answers to avoid jumping to conclusions.
Generating Alternatives This section deals with different ways in which the problem can be resolved. Typically, there are many (the joke is at least three), and being creative at this stage helps. Things to remember at this stage are: 1. Be realistic! While you might be able to find a dozen alternatives, keep in mind that they should be realistic and fit within the constraints of the situation. 2. The alternatives should be mutually exclusive, that is, they cannot happen at the same time. 3. Not making a decision pending further investigation is not an acceptable decision for any case study that you will analyze. A manager can always delay making a decision to gather more information, which is not managing at all! The whole point to this exercise is to learn how to make good decisions, and having imperfect information is normal for most business decisions, not the exception.
| Tunghai University – College of Management
The Case Method 6 An Approach to Case Analysis
4. Doing nothing as in not changing your strategy can be a viable alternative; provided it is being recommended for the correct reasons, as will be discussed below. 5. Avoid the meat sandwich method of providing only two other clearly undesirable alternatives to make one reasonable alternative look better by comparison. This will be painfully obvious to the reader, and just shows laziness on your part in not being able to come up with more than one decent alternative. 6. Keep in mind that any alternative chosen will need to be implemented at some point, and if serious obstacles exist to successfully doing this, then you are the one who will look bad for suggesting it. Once the alternatives have been identified, a method of evaluating them and selecting the most appropriate one needs to be used to arrive at a decision. Key Decision Criteria (KDC) A very important concept to understand, they answer the question of how you are going to decide which alternative is the best one to choose. Other than choosing randomly, we will always employ some criteria in making any decision. Think about the last time that you make a purchase decision for an article of clothing. Why did you choose the article that you did? The criteria that you may have used could have been: 1. 2. 3. 4. 5. 6. fit price fashion color approval of friend/family availability
Note that any one of these criteria could appropriately finish the sentence: the brand/style that I choose to purchase must…. These criteria are also how you will define or determine that a successful purchase decision has been made. For a business situation, the key decision criteria are those things that are important to the organization making the decision, and they will be used to evaluate the suitability of each alternative recommended. Key decision criteria should be: 1. Brief, preferably in point form, such as 1. improve (or at least maintain) profitability, 2. increase sales, market share, or return on investment, 3. maintain customer satisfaction, corporate image, 4. be consistent with the corporate mission or strategy, 5. within our present (or future) resources and capabilities, 6. within acceptable risk parameters, 7. ease or speed of implementation, | Tunghai University – College of Management
The Case Method 7 An Approach to Case Analysis
8. employee morale, safety, or turnover, 9. retain flexibility, and/or, 10. minimize environmental impact.
2. Measurable, at least to the point of comparison, such as alternative A will improve profitability more that alternative B. 3. Be related to your problem statement, and alternatives. If you find that you are talking about something else, that is a sign of a missing alternative or key decision criteria, or a poorly formed problem statement. Students tend to find the concept of key decision criteria very confusing, so you will probably find that you re-write them several times as you analyze the case. They are similar to constraints or limitations, but are used to evaluate alternatives. Evaluation of Alternatives If you have done the above properly, this should be straightforward. You measure the alternatives against each key decision criteria. Often you can set up a simple table with key decision criteria as columns and alternatives as rows, and write this section based on the table. Each alternative must be compared to each criteria and its suitability ranked in some way, such as met/not met, or in relation to the other alternatives, such as better than, or highest.
This will be important to selecting an alternative. Another method that can be used is to list the advantages and disadvantages (pros/cons) of each alternative, and then discussing the short and long term implications of choosing each. Note that this implies that you have already predicted the most likely outcome of each of the alternatives. Some students find it helpful to consider three different levels of outcome, such as best, worst, and most likely, as another way of evaluating alternatives. Recommendation You must have one! Business people are decision-makers; this is your opportunity to practice making decisions. Give a justification for your decision (use the KDC’s). Check to make sure that it is one (and only one) of your Alternatives and that it does resolve what you defined as the Problem.
Structure of the Written Report
Different instructors will require different formats for case reports, but they should all have roughly the same general content. For this course, the report should have the following sections in this order: 1. Title page 2. Table of contents | Tunghai University – College of Management
The Case Method 8 An Approach to Case Analysis
3. Executive summary 4. Problem (Issue) statement 5. Data analysis 6. Key Decision Criteria 7. Alternatives analysis 8. Recommendations 9. Action and Implementation Plan 10. Exhibits
Notes on Written Reports:
Always remember that you will be judged by the quality of your work, which includes your written work such as case study reports. Sloppy, dis-organized, poor quality work will say more about you than you probably want said! To ensure the quality of your written work, keep the following in mind when writing your report: 1. Proof-read your work! Not just on the screen while you write it, but the hard copy after it is printed. Fix the errors before submitting. 2. Use spell checker to eliminate spelling errors 3. Use grammar checking to avoid common grammatical errors such as run on sentences. 4. Note that restating of case facts is not included in the format of the case report, nor is it considered part of analysis. Anyone reading your report will be familiar with the case, and you need only to mention facts that are relevant to (and support) your analysis or recommendation as you need them. 5. If you are going to include exhibits (particularly numbers) in your report, you will need to refer to them within the body of your report, not just tack them on at the end!
This reference should be in the form of supporting conclusions that you are making in your analysis. The reader should not have to guess why particular exhibits have been included, nor what they mean. If you do not plan to refer to them, then leave them out. 6. Write in a formal manner suitable for scholarly work, rather than a letter to a friend. 7. Common sense and logical thinking can do wonders for your evaluation! 8. Proof-read your work! Have someone else read it too! (particularly if English is not your first language) This second pair of eyes will give you an objective opinion of how well your report holds together. Source: FC Manning School of Business, Nova Scotia, Canada (Adapted and edited for use by Steve Varela)
OPTION II: A Strategy Orientation
Houghton Mifflin Publishers (General Business Analysis)
ANALYZING A CASE STUDY As just mentioned, the purpose of the case study is to let you apply the concepts you’ve learned when you analyze the issues facing a specific company. To analyze a case study, therefore, you must examine closely the issues with which the company is confronted. Most often you will need to read the case several times – once to grasp the overall picture of what is happening to the company and then several times more to discover and grasp the specific problems. Generally, detailed analysis of a case study should include eight areas: 1. 2. 3. 4. 5. 6. 7. 8. The history, development, and growth of the company over time The identification of the company’s internal strengths and weaknesses The nature of the external environment surrounding the company A SWOT analysis The kind of corporate-level strategy pursued by the company The nature of the company’s business-level strategy The company’s structure and control systems and how they match its strategy Recommendations
To analyze a case, you need to apply what you’ve learned to each of these areas. We offer a summary of the steps you can take to analyze the case material for each of the eight points we just noted. 1. Analyze the company’s history, development, and growth. A convenient way to investigate how a company’s past strategy and structure affect it in the present is to chart the critical incidents in its history – that is, the events that were the most unusual or the most essential for its development into the company it is today. Some of the events have to do with its founding, its initial products, how it makes new-product market decisions, and how it developed and chose functional competencies to pursue. Its entry into new businesses and shifts in its main lines of business are also important milestones to consider.
2. Identify the company’s internal strengths and weaknesses. Once the historical profile is completed, you can begin the SWOT analysis. Use all the incidents you have charted to develop an account of the company’s strengths and weaknesses as they have emerged historically. Examine each of the value creation functions of the company, and identify the functions in which the company is currently strong and currently weak. Some companies might be weak in marketing; some might be strong in research and development. Make lists of these strengths and weaknesses. The SWOT checklist gives examples of what might go in these lists. | Tunghai University – College of Management
The Case Method 10 An Approach to Case Analysis
3. Analyze the external environment. The next step is to identify environmental opportunities and threats. Here you should apply all information you have learned on industry and macroenvironments, to analyze the environment the company is confronting. Of particular importance at the industry level is Porter’s five forces model and the stage of the life cycle model. Which factors in the macro environment will appear salient depends on the specific company being analyzed. However, use each factor in turn (for instance, demographic factors) to see whether it is relevant for the company in question. Having done this analysis, you will have generated both an analysis of the company’s environment and a list of opportunities and threats. The SWOT checklist lists some common environmental opportunities and threats that you may look for, but the list you generate will be specific to your company. 4. Evaluate the SWOT analysis. Having identified the company’s external opportunities and threats as well as its internal strengths and weaknesses, you need to consider what your findings mean. That is, you need to balance strengths and weaknesses against opportunities and threats.
Is the company in an overall strong competitive position? Can it continue to pursue its current business- or corporate-level strategy profitably? What can the company do to turn weaknesses into strengths and threats into opportunities? Can it develop new functional, business, or corporate strategies to accomplish this change? Never merely generate the SWOT analysis and then put it aside. Because it provides a succinct summary of the company’s condition, a good SWOT analysis is the key to all the analyses that follow. 5. Analyze corporate-level strategy. To analyze a company’s corporate-level strategy, you first need to define the company’s mission and goals. Sometimes the mission and goals are stated explicitly in the case; at other times you will have to infer them from available information. The information you need to collect to find out the company’s corporate strategy includes such factors as its line(s) of business and the nature of its subsidiaries and acquisitions. It is important to analyze the relationship among the company’s businesses. Do they trade or exchange resources? Are there gains to be achieved from synergy?
Alternatively, is the company just running a portfolio of investments? This analysis should enable you to define the corporate strategy that the company is pursuing (for example, related or unrelated diversification or a combination of both) and to conclude whether the company operates in just one core business. Then, using your SWOT analysis, debate the merits of this strategy. Is it appropriate, given the environment the company is in? Could a change in corporate strategy provide the company with new opportunities or transform a weakness into a strength? For example, should the company diversify from its core business into new businesses? Other issues should be considered as well. How and why has the company’s strategy changed over time? What is the claimed rationale for any changes? Often it is a good idea to analyze the company’s businesses or products to assess its | Tunghai University – College of Management
The Case Method 11 An Approach to Case Analysis
situation and identify which divisions contribute the most to or detract from its competitive advantage. It is also useful to explore how the company has built its portfolio over time. Did it acquire new businesses, or did it internally venture its own? All these factors provide clues about the company and indicate ways of improving its future performance. 6. Analyze business-level strategy. Once you know the company’s corporate-level strategy and have done the SWOT analysis, the next step is to identify the company’s business-level strategy. If the company is a single-business company, its business-level strategy is identical to its corporate-level strategy. If the company is in many businesses, each business will have its own business-level strategy. You will need to identify the company’s generic competitive strategy differentiation, low cost, or focus – and its investment strategy, given the company’s relative competitive position and the stage of the life cycle.
The company also may market different products using different business-level strategies. For example, it may offer a low-cost product range and a line of differentiated products. Be sure to give a full account of a company’s businesslevel strategy to show how it competes. Identifying the functional strategies that a company pursues to build competitive advantage through superior efficiency, quality, innovation, and customer responsiveness and to achieve its business-level strategy is very important. The SWOT analysis will have provided you with information on the company’s functional competencies. You should further investigate its production, marketing, or research and development strategy to gain a picture of where the company is going. For example, pursuing a low-cost or a differentiation strategy successfully requires a very different set of competencies. Has the company developed the right ones? If it has, how can it exploit them further? Can it pursue both a lowcost and a differentiation strategy simultaneously?
The SWOT analysis is especially important at this point if the industry analysis, particularly Porter’s model, has revealed the threats to the company from the environment. Can the company deal with these threats? How should it change its business-level strategy to counter them? To evaluate the potential of a company’s business-level strategy, you must first perform a thorough SWOT analysis that captures the essence of its problems. Once you complete this analysis, you will have a full picture of the way the company is operating and be in a position to evaluate the potential of its strategy. Thus, you will be able to make recommendations concerning the pattern of its future actions. However, first you need to consider strategy implementation, or the way the company tries to achieve its strategy. 7. Analyze structure and control systems. The aim of this analysis is to identify what structure and control systems the company is using to implement its strategy and to evaluate whether that structure is the appropriate one for the company. | Tunghai University – College of Management
The Case Method 12 An Approach to Case Analysis
Different corporate and business strategies require different structures. For example, does the company have the right level of vertical differentiation (for instance, does it have the appropriate number of levels in the hierarchy or decentralized control?) or horizontal differentiation (does it use a functional structure when it should be using a product structure?)? Similarly, is the company using the right integration or control systems to manage its operations? Are managers being appropriately rewarded? Are the right rewards in place for encouraging cooperation among divisions? These are all issues that should be considered. In some cases there will be little information on these issues, whereas in others there will be a lot.
Obviously, in analyzing each case you should gear the analysis toward its most salient issues. For example, organizational conflict, power, and politics will be important issues for some companies. Try to analyze why problems in these areas are occurring. Do they occur because of bad strategy formulation or because of bad strategy implementation? Organizational change is an issue in many cases because the companies are attempting to alter their strategies or structures to solve strategic problems. Thus, as a part of the analysis, you might suggest an action plan that the company in question could use to achieve its goals. For example, you might list in a logical sequence the steps the company would need to follow to alter its business-level strategy from differentiation to focus. 8. Make recommendations. The last part of the case analysis process involves making recommendations based on your analysis. Obviously, the quality of your recommendations is a direct result of the thoroughness with which you prepared the case analysis. The work you put into the case analysis will be obvious to the professor from the nature of your recommendations.
Recommendations are directed at solving whatever strategic problem the company is facing and at increasing its future profitability. Your recommendations should be in line with your analysis; that is, they should follow logically from the previous discussion. For example, your recommendation generally will center on the specific ways of changing functional, business, and corporate strategy and organizational structure and control to improve business performance. The set of recommendations will be specific to each case, and so it is difficult to discuss these recommendations here. Such recommendations might include an increase in spending on specific research and development projects, the divesting of certain businesses, a change from a strategy of unrelated to related diversification, an increase in the level of integration among divisions by using task forces and teams, or a move to a different kind of structure to implement a new business-level strategy. Again, make sure your recommendations are mutually consistent and are written in the form of an action plan. The plan might contain a timetable that sequences the actions for changing the company’s strategy and a description of how changes at the corporate level will necessitate changes at the business level and subsequently at the functional level. | Tunghai University – College of Management
The Case Method 13 An Approach to Case Analysis
After following all these stages, you will have performed a thorough analysis of the case and will be in a position to join in class discussion or present your ideas to the class, depending on the format used by your professor. Remember that you must tailor your analysis to suit the specific issue discussed in your case. In some cases, you might completely omit one of the steps in the analysis because it is not relevant to the situation you are considering. You must be sensitive to the needs of the case and not apply the framework we have discussed in this section blindly. The framework is meant only as a guide and not as an outline that you must use to do a successful analysis.