We use cookies to give you the best experience possible. By continuing we’ll assume you’re on board with our cookie policy

Application of Finite Automata Essay Sample

The whole doc is available only for registered users OPEN DOC
  • Pages:
  • Word count: 1142
  • Category: computer

A limited time offer!

Get a custom sample essay written according to your requirements urgent 3h delivery guaranteed

Order Now

Application of Finite Automata Essay Sample

We have seen an example of use of finite automata in describing the operation of a simplified version of vending machine. Many other systems operating in practice can also be modeled by finite automata such as control circuits of computers, computer network communication protocols, lexical analysers for compilers etc. Many of those systems fall into the class of systems called reactive system. A reactive system is a system that changes its actions, outputs and conditions/status in response to stimuli from within or outside it. It is an event driven or control driven system continuously having to react to external and/or internal stimuli. The inputs for a reactive system are never ready unlike for example when two numbers are added together by an adder (Here we are considering an adder at a higher level of abstraction than physical devices level ignoring for example the transient states of the electronic circuit that realizes an adder). An adder does not respond unless the input i.e. two numbers to be added are ready. A system such as an adder is called a transformational system. In the case of vending machine or communication protocol, on the other hand, a system must respond to each stimulus, even to a fragment of input such as each coin tossed in for a can of soda or every message received.

It is generally agreed that finite automata are a natural medium to describe dynamic behaviors of reactive systems. Finite automata are formal and rigorous and computer programs can be easily written to simulate their behaviors. To model a reactive system with finite automaton, first the states the system goes in or the modes of its operation are identified. These become the states of the finite automaton that models it. Then the transitions between the states triggered by events and conditions, external or internal to the system, are identified and they become arcs in the transition diagram of the finite automaton. In addition actions that may take place in those states can also be added to the model. For example consider the following very simplified version of login process to a computer from the computer point of view. Let us assume for simplicity that this computer accepts a single user at a time.

Initially the computer waits for a user name to be typed in. This is one state of the system. When a name is typed in, it checks whether or not the name is valid. If it is valid, then it asks for and then waits for the password, which is another state. If the user name typed in is not valid, it goes back to the initial state. We could make it go to a different state and count the number of login attempts for security purpose. But let us make it simple. When a password is typed in and it is correct, then it accepts the user and starts a session. That is another state though it could further be broken down into a number of more states. When the session terminates, it gets a signal, goes back to the initial state and waits for another login. If the password typed in is incorrect, then it informs the user of that and waits for the next try. That is a fourth state. If the second password fails, it goes to the initial state and starts all over again. Again what we have seen is a model for one level of abstraction. Depending on how much detail we are interested in, different states would be identified and transitions would have to be selected accrdingly.

The next example is a protocol for a computer to follow in communicating with another computer. Again it is a very simplified version.

Initially the computer is in wait state waiting for “Request for Next Message” (RFNM) to come from another computer. When a RFNM starts coming, it goes into the state of receiving it (Our interpretation is that the computer is in a state of receiving an RFNM and it is taking the action of receiving the RFNM) . Upon completion of the RFNM, it sends “Acknowledgement” (ACK) to the other computer, which is another state. After sending the ACK, it starts sending the requested message to the other party. When it is complete, it goes into another wait state waiting for an ACK to come from the other computer. If a negative ACK is received, it resends the message. If a positive ACK is received, it goes back to the initial state and waits for another RFNM to come. Thus a finite automaton that models this protocol has the following five states: initial state (wait for RFNM), receiving RFNM, sending ACK, sending message and waiting for ACK. Again depending on the level of abstraction, different states and transitions would have to be chosen.

Our third example is a system that recognizes numbers with or without a sign such as 5.378, -15, +213.8 etc. One such system initially waits for the first symbol to come in. If the first symbol is a sign, then it goes into a state, denote it by G, that indicates that a sign has been received. If the first digit is received before a decimal point, regardless of whether a sign has been read or not, it goes into a state, denote it by D, that indicates a digit has been read before a decimal point. If a decimal point is received before a digit, then it goes into a state, denote it by P, that indicates that a decimal point has been read. If a decimal point has been read (i.e. in state P), then it must receive at least one digit after that. After one digit it can continue receiving digits. Therefore from state P it goes to another state, denote it by Q, after reading a digit and stays there as long as digits are read. This Q is an accepting state. On the other hand if a digit has been read before a decimal point, i.e. it is in state D, then it can continue receiving digits and stay in D. D is another accepting state. If a decimal point is read while in D, then it goes to state P indicating that a decimal point has been read.

This system can also be described by a regular expression. Since these numbers are represented by strings consisting of a possible sign, followed by zero or more digits, followed by a possible decimal point, followed by one or more digits, they can be represented by the following regular expression: ( s+ + s- + ) ( d+.d+ + d+ + .d+ ), where s+ and s- represent the positive and negative signs, respectively and d { 0 , 1 , 2 , . . . , 9 }.

We can write a custom essay

According to Your Specific Requirements

Order an essay
Get Access To The Full Essay
Materials Daily
100,000+ Subjects
2000+ Topics
Free Plagiarism
All Materials
are Cataloged Well

Sorry, but copying text is forbidden on this website. If you need this or any other sample, we can send it to you via email.

By clicking "SEND", you agree to our terms of service and privacy policy. We'll occasionally send you account related and promo emails.
Sorry, but only registered users have full access

How about getting this access

Become a member

Your Answer Is Very Helpful For Us
Thank You A Lot!


Emma Taylor


Hi there!
Would you like to get such a paper?
How about getting a customized one?

Can't find What you were Looking for?

Get access to our huge, continuously updated knowledge base

The next update will be in:
14 : 59 : 59
Become a Member